eK pH Probe

This high quality probe is a laboratory-grade, high-reliability complex electrode that is designed to take continuous pH measurements in an aquarium.

Specifications:

Accuracy: ±0.5pH(@25°C /77°F)
Measuring Range: 0 ~ 14pH
Temperature Requirement: +5°C ~ +60°C (+41~140°F)
Cable Length: 3m (9.84ft)
Dimension: Φ12x165mm (Φ0.47"x6.5")

All specifications relate to average parameters and may vary depending on settings and/or operating conditions.

Attention:

  • Avoid submerging the entire probe in water. Keep the cap above the water surface at all times.
  • Because the sensor tip is made of glass, please minimize contact with it. Do not clean with hands, cloth, or alcohol.

eK ORP Probe

The ORP (oxidation reduction potential) measurement in marine aquaria is an important parameter that gives insight into processes that disturb the tank’s equilibrium. The standard BNC (Bayonet Neill–Concelman) connector allows for excellent compatibility with other equipment.

Specifications:

Response Time: ≤ 1min
Measuring Range: ±1000mV
Temperature Requirement: +5°C ~ +60°C (+41 ~ +140°F)
Cable Length: 3m (9.84ft)
Dimension: Φ12x165mm (Φ0.47"x6.5")

All specifications relate to average parameters and may vary depending on settings and/or operating conditions.

Attention:

  • Avoid submerging the entire probe in water. Keep the cap above the water surface at all times.
  • Sensor tip is made of glass, please minimize contact with it. Do not clean with hands, cloth, or alcohol.

eK Salinity Probe

Lab-grade sensors measure water salinity, and will alert the user when the measurement moves out of ideal range. The electrodes are subjected to a special treatment during the production process to reduce any capacitive interference caused by the effects of polarization. This process ensures that the probes will continue to output accurate readings even in a highly conductive (salt-water) environment. The standard BNC connector allows for excellent compatibility with other equipment.

Specifications:

Measuring Range: 2000us ~ 200000us
Accuracy: ±2
Temperature Requirement: +0°C ~ +60°C (+32~140°F)
Cable Length: 3m (9.84ft)
Dimension: Φ12x165mm (Φ0.47"x6.5")

All specifications relate to average parameters and may vary depending on settings and/or operating conditions.

Attention:

  • Avoid submerging the entire probe in water. Keep the cap above the water surface at all times.
  • Sensor tip is made of glass, please minimize contact with it. Do not clean with hands, cloth, or alcohol.

eK Temperature Probe

It is important to use long-life temperature probes to protect the environment in your aquatic ecosystem. The eK Temp Probe is specifically designed for aquariums, and went through an anti-corrosion treatment during the manufacturing process to prevent saltwater corrosion.

Specifications:

Accuracy: ±0.5°C(@-10°C ~ +85°C / +14~185°F)
Measuring Range: -55°C ~ +125°C (-67~+257°F)
Cable Length: 3m (9.84ft)
Dimensions: Φ12x165mm (Φ0.47"x6.5")

All specifications relate to average parameters and may vary depending on settings and/or operating conditions.

Attention:

  • Avoid submerging the entire probe in water. Keep the cap above the water surface at all times.
  • Sensor tip is made of glass, please refrain from knocking. Do not clean with hands, cloth, or alcohol.