• Step 1:

    Turn the case cover counter-clockwise to open the casing.

  • Step 2:

    Insert one CR2450 battery.

  • Step 3:

    Close the case cover.

  • Step 4:

    Place the sensor where leakage can potentially happen.


    • This sensor must be in the range of an eKoral controller.
    • The sensor must not be submerged! Only the 3 contacts on the bottom side should be moisturized.
    • Sensor must be placed flat on a surface with the metal tips touching the surface.
    • Keep away from high magnetic field environment.
    • Keep away from corrosive environment.

  • Step 5:

    Pair the sensor with the controller and name the device by using the eKoral App.

  • Step 6:

    Setup is complete.