Step by step installation guides for eKoral Pro:

  • Step 1

    Power on Connect eK Core with its adapter and then plug the adapter into a wall-outlet.

  • Step 2

    Pair your device Download the eKoral app on your mobile device and then pair it with your eK Core. (You will need to scan the serial number’s QR Code or manually key in the Serial number if you prefer)

  • Step 3

    Hardware installation 1 Please find the socket/connecter sticker guide.

    Connect all probes, sensors, and other VFDs (Variable-Frequency Drives) to the corresponding sockets on your eK Core. (You will need to use Cables when connecting eK Core with other VDM devices)

  • Step 4

    Hardware installation 2 Plug eK Power 6 into a wall-outlet and then connect all toggle devices into the corresponding sockets of your eK Power 6.

  • Step 5

    Hardware verification Please verify that all hardware is properly connected by going through the “Hardware Test” on the app.

  • Step 6

    Calibration To ensure the probes operate properly, please calibrate each probe by following the instructions on your app.

  • Step 7

    Probe mount Assemble probe mount and place at the desired location on your tank.

  • Step 8

    Level sensor installation Assemble eK Level Sensor bracket by following the eK Level Sensor installing instruction. Then install eK Level Sensor at the desired location on your tank and ensure that the sensor is parallel to the water.

  • Step 9

    Mounting Should you need to mount your eK Core or eK Power 6, please download the mounting template(s) on our website and follow the instructions.
    (Please set up and pair the eK Core before mount.)
    eK Core mounting template (letter size) / eK Core mounting template (A4 size)
    eK Power 6 mounting template (letter size) / eK Power 6 mounting template (A4 size)

  • Step 10

    All set Now the hardware installation is finished and you can move onto controlling your tank through the app on your mobile device.